Instructions for use

 

Eezisit® Instructions

1. Partial inflation.

Hold vertically (neck at top). With one hand inside the bag use other hand (outside) to “pull” the bag cavity open (allowing air to flow naturally inside).

2. Full inflation.

Remove hand from bag cavity, hold neck seal faces together and roll tightly in the direction of the arrow to compress the trapped air and fully inflate the system.

3. Secure inflated cushion.

When the rolled-up section reaches the Velcro, secure with the Velcro flap/tab and SIT. [Note: if there is insufficient air trapped simply unroll and open the neck to allow more air to enter inside and repeat 2,3. If too much air has entered the cushion to secure the velcro, simply unroll, open the neck slightly, squeeze a little air out of the cavity and repeat 2,3].

Specification:

Finished in matt easy clean PVC as displayed on buy now page. New improved self-seal system and instructions (printed on cushion neck). Size/weight: 160 g; size inflated = 375mm x 375mm (max.) x 120mm; size deflated (e.g. 175mm x 175mm x 10mm, as packed). Comes complete with self-adhesive puncture repair patch; simply cut to size and apply ON THE INSIDE of the cushion for a perfect repair. Eezisit® is made from durable puncture resistant plastic, but should the worst happen, the ability ensure an effective repair is second to none (the repair patch being forced ON to the repaired surface rather than BLOWN OFF, as is the case with ALL CONVENTIONAL inflatable systems.

In addition, any puncture at an actual weld can also be repaired effectively using commercially available soft PVC adhesives (e.g. Technicqll.pl Polyurethane 3 available via Amazon and other suppliers). A simple dab of glue on a finger applied to the weld ON THE INSIDE, followed by firm pressure applied from the outside, enables a perfect re-seal to be accomplished. Thus, unlike normal inflatables where repairs cannot be made from the inside, eezisit® doesn’t need to be discarded at the first sign of trouble but can be made to last and last.

Note this product comes vacuumed down and the initial inflation and removal of folds/creases may take a couple of goes. Please read the instructions printed on the product and have a play around! Like all new and different things, there is a bit of a ‘knack’, but you will quickly get the hang of it and then never look ‘BACK’! Feel free to contact us if you need any assistance.

View in action:

Size rolled up 150mm x 55mm diameter (similar to small micro-umbrella):